Teardown Lab - Virtual Pie Game System

Teardown Lab - Virtual Pie Game System

Time for some proper #retrogaming hackery with a Raspberry Pi!

More pics here: https://backofficeshow.com/projectsview/#/virtualpie

Want to keep track of my content? There is a fully searchable archive at www.backofficeshow.c­om, please check it out!

 

Now you can buy me a coffee! Please support me on Patreon at http://patreon.com/BackofficeShow

 

Thanks you lovely people!

https://backofficeshow.com/projectsview/#/virtualpie/

Double-click to edit...

Teardown Lab - Sinclair Microquartz Clock

I knacker Billy Sastard's priceless and irreplaceable clock!

A Sinclair Microquartz car clock, with a manual dated September 1978. It only seems to work while the set button is held in, so I am hoping for nothing worse than a loose contact. Sadly this repair does not end well: there is a point where you should just stop, and I bulldoze straight through it. Learn from me and skip the last step.
 

Teardown Lab - Transparent TFT panel from monitor

One day someone might be able to turn this into an art!
thanks to @multirotor guy for the panel, check out his great content!

Teardown Lab - Battery Optimiser 3

Im kinda getting fed up with this beastie!

Round three with the OptiMate. This time I try tacking a 12 volt supply straight onto the regulator’s input. It is a very odd circuit: rectified and regulated, but the logic may be doing something quite different to the charging side, possibly using part of the AC waveform. If you know what is going on, let me know.
 

Teardown Lab - Battery Optimiser 2

One more go at getting this thing working!

Back on the OptiMate, armed with a white 12 volt, 5 amp laptop adapter I am hoping can feed it directly. I then try the bench supply cranked up to 15 volts, and only manage to hit the current limit. It does not work at all, so it is back to the drawing board.
 

Teardown Lab - Battery Optimiser 1

 

This optimiser is not running *ahem* optimally!

A battery optimiser is a charger you leave permanently connected, and it would be really handy for cars that drain their batteries during long diagnostic sessions. This one is dead even though the fuse is good, so I open it up to find out why. It takes 15 volts in and puts out 12 volts at 0.6 amps, and I have plenty of laptop supplies lying around if it comes to that.

Teardown Lab - Almost had enough

Just a little winge and a moan!

More of a chat than a teardown today. After days spent on a vehicle with a nagging fault, I talk about the compulsion to fix anything that is even slightly wrong, for better or worse. I also talk production values, and mention the Backoffice Show subreddit as a place to ask your technical questions.
 

Teardown Lab - Range Rover Radio Repair

Lets get this radio cleaned up and ready for action!
 

Teardown Lab - Range Rover DSP Repair Pt3

Lets wrap this puppy up, ready for installation!

The final stretch of the Range Rover DSP repair. With the missing pin fixed and the board and connectors cleaned up, I spray on conformal coating and put the unit back together, remembering the clips that keep the heatsinks in contact. Automotive electronics, isn’t it wonderful? If it does not work, you will see me pulling it apart again.
 

Teardown Lab - Range Rover DSP Repair Pt2

Now we are really getting into the detail of this repair!
 

Teardown Lab - Range Rover DSP Repair Pt1

Let's fix the bane of every soggy L322 Range Rover!
 

Teardown Lab - Automotive Panel Joiners

Not too exciting, but bloody useful!

Another mystery package, described only as a buckle, turns out to be a bag of the push-in panel fasteners used in lots of car fittings. The pin looks like a screw but works more like a wall plug, expanding to hold two panels together. They are cheap and handy, and might even work for mounting a PCB to a sheet of acrylic.
 

Teardown Lab - I2C Matrix Screen

No idea when, where or why I ordered this!

A package labelled only as electronics, quantity two, turns out to hold a small matrix screen module with no documentation at all. There is a PCF series chip on the board, which could be a serial adapter, but who knows? If you recognise it, let me know. For now it goes on the shelf of infinite mystery.

Teardown Lab - Old TV Composite Hack

Want to breathe new life into that old TV? Have a car with an analogue tuner?

Teardown Lab - Nintendo RF Modulator

A cheap source of composite to RF to composite modulators you didn't even know you needed!